Aircraft Spruce is not just aircraft wood, in fact, it's one of the largest aviation supply stores in the world.

NASA tends to attract them. This was in addition to consulting with a number of astronauts and certified test pilots. Wikimedia Commons. We should all be so lucky. Built with composite ensures a very strong construction, resistant to corrosion and fatigue. Two types of woven fiberglass are used to provide the surface strength of the composite sandwich. Remember Me Forgot your password? Prints are available in a number of sizes and finishes. That meant designing his own mount and doing his own welding. The second was his Cozy III.

Blue rigid styrofoam is cut with a hot wire saw to form the wing cores. He completed the final assembly in that hangar. Wing area. Download as PDF Printable version. That was corrected and he began logging some serious time. He made up a list of materials and began ordering from Aircraft Spruce. Add links. That of course eliminated any possibility of using any of the prefabricated parts manufactured by third parties. The aircraft is constructed primarily of fiberglass, foam, and epoxy.

The only digital items in his panel are a GRT engine monitor, digital tach and chronometer. Empty wt. He made up a list of materials and began ordering from Aircraft Spruce. Canard Area. Though he felt confident of his ability to handle the Cozy in ground effect, he still wanted to shoot a few landings in a Cozy with someone beside him. NASA tends to attract them. At the end, his instructor asked him what he was planning to do with his new skills and when Dennis explained, the instructor invited him to watch a demonstration of TIG welding. Dennis got a set of plans for that shape and built it.

Engine Lycoming O hp. View large image. On a clear Sunday morning, when Dennis pretty much had the airport to himself, he lifted off in his years-in-the-making Cozy. Use Facebook account. This includes purchasing some pre-fab parts which would be difficult for an unskilled builder to make himself, such as cowlings, canopy, landing gear struts, engine mount, manual or electric nose-gear retract mechanism, and other parts which require machining or welding. Between the Silver last year and the Gold this year, he added wheelpants and tended to a number of details that put him over the top. The mold also allowed him to fabricate cowl parts that have a perfectly smooth interior. With a huge selection of "all-things-needed" for any aircraft builder you are sure to find whatever you nee Nat Puffer designed the aircraft as a high speed cross-country VFR aircraft, although many builders equip their planes with IFR capabilities.

That of course eliminated any possibility of using any of the prefabricated parts manufactured by third parties. We use cookies to maximise your experience and make our website easier for you to use. How much does it cost? These designs are protected with U. How long does it take to build a Cozy? Dennis got a set of plans for that shape and built it. He borrowed test pilot literature from some of his friends, sat in on a one-day EAA seminar on test flying your own airplane and watched an EAA film on test flying. Thin PVC foam sheets are used to form bulkheads and the fuselage sides. Buy A Print Or Gift Buy a print, poster or gift of this image for personal or corporate decorative display. Urethane foam is used to form highly curved, hand-carved shapes such as the nose and wing tips.

Buy a print, poster or gift of this image for personal or corporate decorative display. There was a lot of stress associated with that job and the Cozy gave him an escape. Log in Log in to Pilotmix. How much does it cost? That of course eliminated any possibility of using any of the prefabricated parts manufactured by third parties. Engine Lycoming O hp. He filled in all of the spaces around them with pour foam and when the foam hardened, he filed and sanded it down to the tops of his blue plastic plugs. With a huge selection of "all-things-needed" for any aircraft builder you are sure to find whatever you nee

This includes purchasing some pre-fab parts which would be difficult for an unskilled builder to make himself, such as cowlings, canopy, landing gear struts, engine mount, manual or electric nose-gear retract mechanism, and other parts which require machining or welding. Two types of woven fiberglass are used to provide the surface strength of the composite sandwich. To create a cowl for his Cozy, Dennis tilted the aircraft into a 90 degree up position leaving the engine pointing down and wrapped the engine in a kind of industrial Saran wrap. These designs are protected with U. Cookies are very small text files that are stored on your computer when you visit some websites. Help Learn to edit Community portal Recent changes Upload file. Latest 50 Slideshow. Canard Span. He got into his Cozy and did the same drill. Built with composite ensures a very strong construction, resistant to corrosion and fatigue.

Help Learn to edit Community portal Recent changes Upload file. Dennis was working in the basement. It has a range of about 1, miles and a top speed of mph. Views Read Edit View history. Unsourced material may be challenged and removed. Wing area. Log in Log in to Pilotmix. The second was his Cozy III. Prints are available in a number of sizes and finishes.

Go back. This was in addition to consulting with a number of astronauts and certified test pilots. There were always plenty of engineers available for opinions and verifying. To create a cowl for his Cozy, Dennis tilted the aircraft into a 90 degree up position leaving the engine pointing down and wrapped the engine in a kind of industrial Saran wrap. Nat Puffer designed the aircraft as a high speed cross-country VFR aircraft, although many builders equip their planes with IFR capabilities. Both men crossed the street frequently to help the other or seek advice. He filled in all of the spaces around them with pour foam and when the foam hardened, he filed and sanded it down to the tops of his blue plastic plugs. Then he moved to the Clear Lake, Texas to begin working at the Johnson Space Center and while a new home was being built for his family, they lived in an apartment. The second was his Cozy III. What engines are approved?

Then he moved to the Clear Lake, Texas to begin working at the Johnson Space Center and while a new home was being built for his family, they lived in an apartment. The aircraft is constructed primarily of fiberglass, foam, and epoxy. Namespaces Article Talk. From Wikipedia, the free encyclopedia. Views Read Edit View history. When all of the plugs were showing through the foam like so many polka dots, he created a mold for a fiberglass cowling that was close fitting and which eliminated potential engine cooling problems. Gross wt. This was in addition to consulting with a number of astronauts and certified test pilots. Help Learn to edit Community portal Recent changes Upload file.

With the completion of the upholstery, Dennis was running out of reasons not to take an active runway. He borrowed test pilot literature from some of his friends, sat in on a one-day EAA seminar on test flying your own airplane and watched an EAA film on test flying. He made up a list of materials and began ordering from Aircraft Spruce. Between the Silver last year and the Gold this year, he added wheelpants and tended to a number of details that put him over the top. Composite construction also offers great protection to the occupants. We should all be so lucky. This includes purchasing some pre-fab parts which would be difficult for an unskilled builder to make himself, such as cowlings, canopy, landing gear struts, engine mount, manual or electric nose-gear retract mechanism, and other parts which require machining or welding. The only digital items in his panel are a GRT engine monitor, digital tach and chronometer. When all of the plugs were showing through the foam like so many polka dots, he created a mold for a fiberglass cowling that was close fitting and which eliminated potential engine cooling problems. It took him about two years total to build the engine mount, hang the engine and make the cowl.

Canard Span. This was in addition to consulting with a number of astronauts and certified test pilots. Dennis was working in the basement. Gyrocopter Ultralight aircraft engines Unspecified. Wikimedia Commons. View large image. Buy A Print Or Gift Buy a print, poster or gift of this image for personal or corporate decorative display. He filled in all of the spaces around them with pour foam and when the foam hardened, he filed and sanded it down to the tops of his blue plastic plugs. Please help improve this article by adding citations to reliable sources. The ground runs eventually turned into Spruce Goose hops and he did a number of those, becoming comfortable with the slow speed control.

Latest 50 Slideshow. Follow airteamimages. Having studied photos of Nat and his wife, Shirley, inside the Cozy, and looked at the plans, Dennis set himself an extra level of challenge before he ordered a single part or piece of material. Gyrocopter Ultralight aircraft engines Unspecified. You might also like We use cookies to maximise your experience and make our website easier for you to use. Remember Me Forgot your password? Log in. The dihedral creates better airflow between the canard and the main wing, enhancing performance slightly. At the end, his instructor asked him what he was planning to do with his new skills and when Dennis explained, the instructor invited him to watch a demonstration of TIG welding.

The second was his Cozy III. The only digital items in his panel are a GRT engine monitor, digital tach and chronometer. Unsourced material may be challenged and removed. Fortunately, he was at Ellington Field, a class D airspace and the tower was happy to work with him. Blue rigid styrofoam is cut with a hot wire saw to form the wing cores. That was corrected and he began logging some serious time. The builder does not need pre-fabricated items to finish the aircraft except for the landing gear bow and nose gear strut which require forms and an oven for post curing, but suppliers exist for these parts, such as Featherlite of Ukiah CA. There were times when the process had the effect of therapy. When it came to the panel, Dennis preferred the old steam gages, over what was new at the time: glass panels and EFIS. Related Image Searches The following keywords are used for this image - select a keyword to see related images.

That was corrected and he began logging some serious time. Wing area. He covered that with duct tape, then made up hundreds of blue plastic plugs about the size of a wooden thread spool, which he glued to the duct tape. He borrowed test pilot literature from some of his friends, sat in on a one-day EAA seminar on test flying your own airplane and watched an EAA film on test flying. Add links. These designs are protected with U. Wikimedia Commons. The Cozy utilizes foam and fiberglass sandwich construction, with foam suited to the usage, fiberglass oriented for the stresses, and epoxy to bond them together. It does not include the cost of an engine, or expensive instruments and avionics.

Log in Log in to Pilotmix. How much does it cost? These designs are protected with U. Blue rigid styrofoam is cut with a hot wire saw to form the wing cores. Follow airteamimages. Both men crossed the street frequently to help the other or seek advice. Nat Puffer designed the aircraft as a high speed cross-country VFR aircraft, although many builders equip their planes with IFR capabilities. This article does not cite any sources. Prints are available in a number of sizes and finishes. Image ID:

Related Image Searches The following keywords are used for this image - select a keyword to see related images. What engines are approved? Thin PVC foam sheets are used to form bulkheads and the fuselage sides. That meant designing his own mount and doing his own welding. Composite construction also offers great protection to the occupants. This was in addition to consulting with a number of astronauts and certified test pilots. With the completion of the upholstery, Dennis was running out of reasons not to take an active runway. It is not a kit aircraft, though many small parts are available prefabricated.

We use cookies to maximise your experience and make our website easier for you to use. Dennis got a set of plans for that shape and built it. Gyrocopter Ultralight aircraft engines Unspecified. Fortunately, he was at Ellington Field, a class D airspace and the tower was happy to work with him. This article does not cite any sources. There were times when the process had the effect of therapy. The only Rutan design that was still available was the Cozy, which Nat Puffer was selling under license with Scaled Composites. To create a cowl for his Cozy, Dennis tilted the aircraft into a 90 degree up position leaving the engine pointing down and wrapped the engine in a kind of industrial Saran wrap. He also changed the shape of his canard.

Follow airteamimages. Buy A Print Or Gift Buy a print, poster or gift of this image for personal or corporate decorative display. Remember Me Forgot your password? Both men crossed the street frequently to help the other or seek advice. Wikimedia Commons. Views Read Edit View history. He also changed the shape of his canard. Gross wt. That was corrected and he began logging some serious time.

Built with composite ensures a very strong construction, resistant to corrosion and fatigue. When all of the plugs were showing through the foam like so many polka dots, he created a mold for a fiberglass cowling that was close fitting and which eliminated potential engine cooling problems. Dennis got a set of plans for that shape and built it. Between the Silver last year and the Gold this year, he added wheelpants and tended to a number of details that put him over the top. Having studied photos of Nat and his wife, Shirley, inside the Cozy, and looked at the plans, Dennis set himself an extra level of challenge before he ordered a single part or piece of material. Aircraft type cont. Both men crossed the street frequently to help the other or seek advice. The aircraft is constructed primarily of fiberglass, foam, and epoxy. This article does not cite any sources. We should all be so lucky.

Add links. Gyrocopter Ultralight aircraft engines Unspecified. Engine Lycoming O hp. The second was his Cozy III. Go back. Namespaces Article Talk. The only Rutan design that was still available was the Cozy, which Nat Puffer was selling under license with Scaled Composites. On a clear Sunday morning, when Dennis pretty much had the airport to himself, he lifted off in his years-in-the-making Cozy. He made up a list of materials and began ordering from Aircraft Spruce.

The Cozy utilizes foam and fiberglass sandwich construction, with foam suited to the usage, fiberglass oriented for the stresses, and epoxy to bond them together. For information on this photo or to request a quotation to supply this image as a high resolution file for commercial or editorial purposes. There were times when the process had the effect of therapy. Remember Me Forgot your password? One of the astronauts, Ken Cameron, had a Cozy. The aircraft is constructed primarily of fiberglass, foam, and epoxy. He also changed the shape of his canard. Dennis was working in the basement. The aircraft is built from plans using basic raw materials.

Image ID: How much does it cost? Nat Puffer designed the aircraft as a high speed cross-country VFR aircraft, although many builders equip their planes with IFR capabilities. When it came to the panel, Dennis preferred the old steam gages, over what was new at the time: glass panels and EFIS. Wikimedia Commons. What caused him to have such allegiance to the steam gages? When all of the plugs were showing through the foam like so many polka dots, he created a mold for a fiberglass cowling that was close fitting and which eliminated potential engine cooling problems. Unsourced material may be challenged and removed. It has a range of about 1, miles and a top speed of mph.

Dennis was working in the basement. With a huge selection of "all-things-needed" for any aircraft builder you are sure to find whatever you nee The aircraft is built from plans using basic raw materials. Engine Lycoming O hp. There were times when the process had the effect of therapy. Both men crossed the street frequently to help the other or seek advice. He covered that with duct tape, then made up hundreds of blue plastic plugs about the size of a wooden thread spool, which he glued to the duct tape. When all of the plugs were showing through the foam like so many polka dots, he created a mold for a fiberglass cowling that was close fitting and which eliminated potential engine cooling problems. The only Rutan design that was still available was the Cozy, which Nat Puffer was selling under license with Scaled Composites. He made up a list of materials and began ordering from Aircraft Spruce.

Latest 50 Slideshow. The builder does not need pre-fabricated items to finish the aircraft except for the landing gear bow and nose gear strut which require forms and an oven for post curing, but suppliers exist for these parts, such as Featherlite of Ukiah CA. He also changed the shape of his canard. Fortunately, he was at Ellington Field, a class D airspace and the tower was happy to work with him. He completed the final assembly in that hangar. How much does it cost? The aircraft is built from plans using basic raw materials. The aircraft is constructed primarily of fiberglass, foam, and epoxy.

The dihedral creates better airflow between the canard and the main wing, enhancing performance slightly. Wikimedia Commons has media related to Rutan Cosy. Latest 50 Slideshow. That meant designing his own mount and doing his own welding. Image ID: Views Read Edit View history. Composite construction also offers great protection to the occupants. The only digital items in his panel are a GRT engine monitor, digital tach and chronometer. There were always plenty of engineers available for opinions and verifying. He also changed the shape of his canard.

We have evaluated the 6-cylinder hp Franklin engine. This includes purchasing some pre-fab parts which would be difficult for an unskilled builder to make himself, such as cowlings, canopy, landing gear struts, engine mount, manual or electric nose-gear retract mechanism, and other parts which require machining or welding. Then he moved to the Clear Lake, Texas to begin working at the Johnson Space Center and while a new home was being built for his family, they lived in an apartment. That meant designing his own mount and doing his own welding. Urethane foam is used to form highly curved, hand-carved shapes such as the nose and wing tips. NASA tends to attract them. Unsourced material may be challenged and removed. Categories : Canard aircraft Single-engined pusher aircraft. What caused him to have such allegiance to the steam gages? This site uses Cookies.

Thin PVC foam sheets are used to form bulkheads and the fuselage sides. Unsourced material may be challenged and removed. Help Learn to edit Community portal Recent changes Upload file. There were always plenty of engineers available for opinions and verifying. Dennis got a set of plans for that shape and built it. He did that 5 times over a dozen years and everyone enjoyed it. Nat Puffer designed the aircraft as a high speed cross-country VFR aircraft, although many builders equip their planes with IFR capabilities. Built with composite ensures a very strong construction, resistant to corrosion and fatigue. Canard Area.

How long does it take to build a Cozy? Gyrocopter Ultralight aircraft engines Unspecified. That was corrected and he began logging some serious time. Use Facebook account. It is not a kit aircraft, though many small parts are available prefabricated. What engines are approved? Having studied photos of Nat and his wife, Shirley, inside the Cozy, and looked at the plans, Dennis set himself an extra level of challenge before he ordered a single part or piece of material. The second was his Cozy III. This includes purchasing some pre-fab parts which would be difficult for an unskilled builder to make himself, such as cowlings, canopy, landing gear struts, engine mount, manual or electric nose-gear retract mechanism, and other parts which require machining or welding.

Then he moved to the Clear Lake, Texas to begin working at the Johnson Space Center and while a new home was being built for his family, they lived in an apartment. He got into his Cozy and did the same drill. From Wikipedia, the free encyclopedia. Ken allowed Dennis to shoot a few landings from the right seat and wished him the best. He made up a list of materials and began ordering from Aircraft Spruce. Two types of woven fiberglass are used to provide the surface strength of the composite sandwich. He redrew the plans and consulted with some of his friends in the space program. Empty wt.